| Handcrafted Cues by Schmelke 
			Each Schmelke Pool Cue is built and designed by master craftsmen for 
			straightness, hitting power, balance and durability.  All cues 
			are made from the finest hardwoods, both foreign and domestic.  
			The shafts are selected from hard maple, first air dried for 
			whiteness, then kiln dried and aged to guard against warping.  
			Each cue has a specially made tip mounted on a high impact fibre 
			ferrule.  A choice of four joint styles ensures the hit and 
			balance suited to each individual players game.  
			All Schmelke cues have a specially designed UV finish, usually found 
			on only the most expensive cues on the market.  All shafts are 
			coated with a non-stick UV finish and hand polished to insure a 
			satin feel and a smooth stroke. 
			Quality, Options and Service
             
				
                  Exclusive Shaft Finish - 
				  Protects from warpage, prevents dirty shafts 
                  UV Finish - Gives both the 
				  shaft and butt a superior feel and protection
              	
                  Joint Construction - 
				  Threaded joint affixed by epoxy
              	
                  Materials - The finest aged 
				  wood, tips, ferrules and joint parts
              	
                  
				  Options - Your choice of weight, joint type, wrap, and cue 
				  length
              	 Schmelke Shafts 
				
              Standard shafts are made of high 
			  quality hard rock maple
              Our laminated shafts are also 
			  high quality hard maple only these are cut down, pieced and glued 
			  together to give a stiffer, more solid hit.  On average these 
			  shafts have about 22 laminations per inch. 
              Both our standard and laminated 
			  shafts are turned down and finished the same way with our super 
			  smooth UV finish. Schmelke Joints 
				
              Joint #1 is solid brass 9/16 x 
			  24.  Joint #1 gives the cue a very forward balance with a 
			  crisp hit and very little feel.
              Joint #2 is 5/16 x 18 stainless 
			  steel.   Joint #2 gives the cue a forward balance with a 
			  fairly crisp hit with a little more  feel than joint #1. 
              
              Joint #3 is 5/16 x 18 ertalyte.  
			  Joint #3 gives the cue a less forward balance with a soft hit with 
			  a little more feel.
              Joint #4 is 3/4 x 10 directly 
			  into the shaft wood with an ertalyte collar.  Joint #4 gives 
			  the cue a less forward balance with a very soft hit and a lot of 
			  feel. |